1502 Pike St NW #3 Auburn, WA. 98001
E-mail us: info@thebrightplumbing.com
Mon to Fri: 8am to 6pm
A well-functioning bathroom adds comfort to your daily routine. You don’t want to deal with leaks, clogs, or low water pressure when you’re trying to shower, brush your teeth, or flush the toilet. That’s why it’s important to take care of your bathroom plumbing and prevent any problems before they become serious.
In this article, we’ll share some tips on how to keep your bathroom plumbing in top shape and what to do if you need professional help.
Leaks are not only annoying, but they can also waste water and increase your utility bills. They can also cause damage to your walls, floors, and fixtures if left untreated. That’s why you should check for leaks regularly and fix them as soon as possible.
Some signs of leaks include:
– Dripping faucets or showerheads
– Wet spots or stains on the ceiling or walls
– Mold or mildew growth
– Low water pressure
– Higher than usual water bills
To check for leaks, you can use a simple method called the dye test. All you need is some food coloring or dye and a toilet. Here’s how it works:
– Remove the lid from the toilet tank and flush the toilet.
– Wait for the tank to refill and then add a few drops of food coloring or dye to the water.
– Wait for about 15 minutes and then check the toilet bowl. If the water is colored, it means you have a leak in the flapper valve or the fill valve.
– Replace the faulty valve or call a plumber to fix it.
You can also check for leaks under the sink, behind the toilet, and around the tub or shower. Look for any signs of moisture, corrosion, or damage. If you find any leaks, tighten the connections or replace the washers. If the problem persists, call a plumber to inspect and repair it.
Clogs are another common problem that can affect your bathroom plumbing. They can cause slow drainage, bad odors, and even backups. They can also damage your pipes and fixtures if they are not cleared.
To prevent clogs, you should clean your drains regularly and avoid putting anything that can cause blockages down the drain. Some things that you should never flush or pour down the drain include:
– Hair
– Grease
– Coffee grounds
– Paper towels
– Feminine products
– Cotton swabs
– Dental floss
– Medications
To clean your drains, you can use a plunger, a snake, or a natural solution of baking soda and vinegar. Here’s how to use each method:
– Plunger: Fill the sink or tub with enough water to cover the plunger. Place the plunger over the drain and push and pull vigorously until the water starts to drain.
– Snake: Insert the snake into the drain and twist it until you feel some resistance. Pull out the snake and remove any debris that comes out with it. Repeat until the drain is clear.
– Baking soda and vinegar: Pour half a cup of baking soda down the drain followed by half a cup of vinegar. Wait for about 15 minutes and then flush with hot water.
If none of these methods work, call a plumber to clear the clog professionally.
Water pressure is another factor that can affect your bathroom plumbing. Too high water pressure can cause leaks, bursts, and damage to your pipes and fixtures. Too low water pressure can make your showers and faucets less effective and enjoyable.
The ideal water pressure for most homes is between 40 and 60 psi (pounds per square inch). You can measure your water pressure with a gauge that attaches to your faucet or hose bib. If your water pressure is too high or too low, you can adjust it with a pressure regulator or a booster pump.
A pressure regulator is a device that reduces the water pressure coming from the main line to a safe level for your home. It is usually located near the main shut-off valve or the water meter. You can adjust it by turning a screw or a knob until you reach the desired pressure.
A booster pump is a device that increases the water pressure coming from the main line or a well to a higher level for your home. It is usually installed near the main shut-off valve or the well pump. You can adjust it by turning a dial or a switch until you reach the desired pressure.
If you are not sure how to adjust your water pressure or if you need help installing a pressure regulator or a booster pump, call a plumber to do it for you.
While some minor plumbing issues can be fixed by yourself, some major ones require professional help. A professional plumber has the skills, tools, and experience to handle any plumbing problem safely and efficiently. They can also inspect your plumbing system and recommend any repairs or upgrades that can improve its performance and longevity.
Some of the benefits of hiring a professional plumber include:
– Saving time and money
– Avoiding mistakes and accidents
– Getting quality work and warranty
– Preventing future problems
If you are looking for a reliable, affordable, and friendly plumber in Washington state, look no further than The Bright Plumbing. We are a family-owned and operated business that specializes in residential plumbing. We offer a wide range of plumbing services, including:
– Leak detection and repair
– Drain cleaning and repair
– Faucet, sink, and toilet installation and repair
– Tub, shower, and water heater installation and repair
– Water filtration and softening systems
– Sump pump and garbage disposal installation and repair
– Sewer line inspection and repair
– And more!
We are licensed, bonded, and insured, and we guarantee your satisfaction with our work. We also offer free estimates, 24/7 emergency service, and senior discounts.
Modern cynics and skeptics...see no harm in paying those to whom they entrust the minds of their children a smaller wage than is paid to those to whom they entrust the care of their plumbing
- John F. Kennedy
Don’t entrust your plumbing to anyone but the best. Contact The Bright Plumbing today and let us take care of your bathroom plumbing needs. You’ll be glad you did!
Call us now:
